Listening To The Radio/Siriusxm™ Satellite Radio - Kenwood KDC-610U Quick Start Manual

Listening to the radio/SiriusXM™ Satellite Radio
[SRC]
[ 1 / 6 ]
Selecting a tuner source
Select "TUNER" or "SiriusXM" (optional
accessory). Refer to <Source selection>
(page 6).
Selecting a band (FM or AM)
(Tuner only)
Press [R].
Selecting a station
Press [E] or [F].
The seek mode can be changed. Refer to
<9-5. Tuner setting> or <12-20. SiriusXM
tuner setting> in Instruction manual.
Station preset memory
1
Press [R] to select a band. (Tuner only)
2
Press [E] or [F] to select the station
you want to save in the station preset
memory.
3
"TUNER": Press [1/6].
"SiriusXM": Press [1/6] twice.
Press [1/6] again to enter the Mix
Station preset mode. In this mode,
different bands and tuner sources (Radio,
SiriusXM etc.) can be saved in the same
preset layer, which allows you to recall
a desired station without switching
between bands and/or tuner sources.
Maximum of 6 stations can be preset in
the Mix Station preset mode.
[Control] knob
[ E / F ]
[ R ]
4
Turn [Control] knob to select preset
number (FM: "1" – "18", AM: "1" – "6",
SiriusXM: "1" – "24"), and then press and
hold [Control] knob.
Recalling the stations/Channel in
the memory
1
Press [R] to select a band. (Tuner only)
2
"TUNER": Press [1/6].
"SiriusXM": Press [1/6] twice.
3
Turn [Control] knob to select a preset
number (FM: "1" – "18", AM: "1" – "6",
SiriusXM: "1" – "24"), and then press
[Control] knob.
In the Mix Station preset mode, band
names of tuner sources are displayed as
follows:
FM: FM broadcast station
AM: AM broadcast station
SXM: SiriusXM channel
English | 7