Table of Contents
Advertisement
B
CM08
Specify the calling number, which is sent to
ISDN Terminal from Single Line Telephone/
term
D
(for station to station call).
[Series 3700 R12.2 software required]
Allow sending extension information of Low
layer Compatibility (LLC) information ele-
ment for connection between ISDN terminals/
ISDN trunks.
[Series 3200 R6.2 software required]
CME5
Specify the make busy of B channel (B1, B2)
for ISDN Terminal, if required.
END
NOTE:
The calling party number consists of the following numbers.
Calling party number: YYYY
For example:
In this case, the Calling Party Number is 5000.
That is
ISDN Subscribers No. assigned by CM12 Y=12 is 5000.
DESCRIPTION
ISDN subscriber No. assigned by CM12 Y=12 (1-4 digits)
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN TERMINAL DATA PROGRAMMING
(1)
584
(2)
0 : Calling Party No. (assigned by CM12
Y=12, 13)
1 : Station No.
(1)
722
(2)
0: Allow
•
Y=2
(1)
XXXXXXXX
XXXXXXXX: ISDN Line Station No.
Z: 0: B1 channel
1: B2 channel
(2)
0 : Make busy
1 : In service
– 166 –
DATA
NOTE
,
Z
NWA-008852-001 Rev.5.0
98ch3002.fm
NOVEMBER/15/2006
Advertisement
Table of Contents
