Gemini CDMP-7000 User Manual page 5

c l e a n i n g t h e
u n i t
To clean the CDMP-7000, use only a dry soft cloth and/or com-
pressed air. If the unit is soiled with stubborn dirt, we suggest
using a 2:1 solution of distilled water and 30% isopropyl alcohol.
Avoid using harsh cleaning chemicals such as benzene, paint
thinner, bleach, or hydrochloric acid, which will damage the unit.
o p e r a t i n g
c o n d i t i o n s
For optimum performance, the temperature of the operating
environment should be between +5º C to +35º C (+41º F - +95º
F). Failure to maintain proper operating temperature may result
in difficulty reading the display, thermal overload, or system-
wide instability. Avoid exposing the unit to direct sunlight.
When placing the unit in an installation, make sure that it is
placed on a stable surface, as far away from vibrations as possi-
ble. Even though the unit is impervious to vibration, the storage
devices (specifically hard drive based ones) that are designed
to be used in conjunction with it are typically not. Also be sure
not to place or use the player on heat generating sources, such
as amplifiers or near spotlights.
p l a y a b l e f o r m a t s
a n d d i s c s
The CDMP-7000 plays discs (CD compatible) as well as music
files on USB memory devices. All of the following file formats
are supported:
• WAV (16-bit PCM, sample rates of 8 kHz, 11.025 kHz, 12
kHz, 16 kHz, 22.50 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz)
• MP3 (16 bit, 44.1 kHz, MPEG-I, Layer III)
• AAC (16 bit, 44.1 kHz, stereo, AAC Core, AAC Plus, AAC
Plus v2)
• AIFF (16 bit, 44.1 kHz, stereo)
Supported file systems on Memory Stick Devices include:
• FAT
• FAT32
• HFS+
• NTFS
-
c d m p 7 0 0 0 m a n u a l • g e m i n i d j
.
c o m
i n t r o d u c t i o n
u s i n g m i d i
c o n t r o l
The CDMP-7000 can also send MIDI data from the buttons and
dials to a computer to control the parameters and playback
controls of DJ software. The audio playback from the computer
can also be output from the CDMP-7000.
Before using the CDMP-7000 as an audio device, connect
the CDMP-7000 with a USB cable and allow your PC/MAC to
detect it. Open your DJ software and select the CDMP-7000's
output device in the DJ software's settings. For instructions on
how to do this, see your DJ software's operating instructions.
c o n n e c t i n g t o
a c o m p u t e r
The CDMP-7000 is a plug and play device that requires no soft-
ware installation. The CDMP-7000's audio and MIDI drivers are
compatible with PC and MAC.
• To use the CDMP-7000 with a computer using Windows,
connect the CDMP-7000 to your PC after starting up the
computer. The CDMP-7000 will configure standard WDM
drivers. Select the CDMP-7000 as your device to use it as
your audio device. ASIO drivers can also be configured for
use with the CDMP-7000, such as ASIO4ALL.
• To use the CDMP-7000 with a computer using a MAC op-
erating system, connect the CDMP-7000 to your MAC after
starting up the computer. Use the system's standard CORE
Audio drivers and select the CDMP-7000 as the device.
6