Electro-Magnetic Compatibility; Maintenance; Cleaning; Repairs - Medion Erazer X81005 MD 85954 Instruction Manual

-4-

Electro-Magnetic Compatibility


Allow a clearance of at least 50 cm (19.7") from sources of high-frequency and magnetic
interference (TV, mobile telephone, infrared devices, loudspeaker cabinets, etc), in order
to avoid malfunctions and loss of data. The distance between the transmitter and the re-
ceiver should be greater than 50 cm (19.7").

When connecting additional or other components ensure that Guidelines for Electro-
Magnetic Compatibility (EMC) are observed.

Maintenance

Cleaning


Clean the devices and other components with a damp cloth. Do not use any solvents, cor-
rosives or gaseous detergents.

Repairs


This device should only be repaired by an authorised service centre. Please contact cus-
tomer care if you have any technical problems.
Remove the power plug of your computer from the mains and contact the MEDION Help Desk on
1300 884 987

if the connections are cut or otherwise damaged;

if liquid has entered the device housing;

if a device does not operate correctly;

if a device is dropped or the housing damaged.

Recycling

Packaging
All packaging and packaging materials that are no longer required can and should be recycled.
After Sales Support TEL: 1300 884 987 WEB Support: www.medion.com.au