Advertisement
Available languages
Available languages
WARNING
ElectricalShock Or Personal Injury
Hazard
Disconnect electdcal supply before
servicingor cleaning the unit. Failure
to do so could result in electrical shock
or personal injuryfrom cleaner sud-
denly starting.
TO REMOVE LIGHT BULB
Disconnect
power cord from electrical
out-
let.
Light
Pry light lens
out at slot in
rear as shown
on both sides.
Rotate lens up
and lift off.
Slots
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the bulb
could overheat surroundingplastic
Remove the
light bulb by
pulling
straight out.
To Release
To replace
the light
bulb careful-
ly insert fully
into slot.
Note: See PARTS AND FEATURES
for bulb
number.
uD ° CAUTION
I
ot plug inor turnon until t he vacu-
s completely reassembled.
To replace light
lens, place tabs
at front of lens
into slots. Rotate
lens down and
snap into place.
To maintain efficient cleaning, the agitator
must be kept free of carpet pile, string, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum over and check
agitator for string and hair build-up.
Use a scissors
to remove any build-up
entangled
around the agitator.
17
Advertisement
