Bit Image Graphics - DCA Intertel JP 215 Technical Manual

7.3 Bit Image Graphics (1)

1.640 dots/line graphics
2.Command "ESC" "V"(N1) (N2)
3.Hexadecimal Data <1B><5G><n1><n2>
4.Function
This is a four byte command which sets up the bit image graphics mode. The two
bytes (n1.n2) are the ASCII presentation of the number of dot lines to be printed in
the graphic mode. The size of the printing dot is 0.125 mm by 0.130 mm. The number
of transmission data bytes is specified by (n1). (n2).
(Total data bytes)=(80 bytes) x (n1) (n2)
Example
In case of ESC V
1
MSB LSB
1
81
2 MSB LSB
20401
256 MSB LSB
DCA Intertel
00H 01H
(lower) (upper)
0100H=256 lines
80
160
20480
12 DCA Intertel
7.4 Bit Image Graphics (2)
1.248 dots/line graphics
2.Commands "ESC" "K" (N1) (N2)
3.Hexadecimal Data <1B><4B><n1><n2>
4.Function
This is a four bytes command which sets up the bit image graphic mode. The two
bytes (n1.n2) are the ASCII presentation of the number of dot lines to be printed in
the graphic. The size of the printing dot is enlarged to 0.375 mm by 0.390 mm. The
number of transmission data bytes is specified by (n1).(n2).
(Total data bytes)=(31 bytes) x (n1) (n2)
Example
In case of ESC V
1
1 MSB LSB
32
2
7906
256
DCA Intertel
00H 01H
(lower) (upper)
0100H=256 lines
31
62
7936
13 DCA Intertel