Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity; Safety Instructions - DeWalt DW770 User Manual

EN G LI S H
DW770, DW771, DW777 CROSS-CUT MITRE SAW
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.

Technical Data

Voltage V
(U.K. & Ireland only) V
Type
Power input W
Blade diameter mm
Blade bore mm
-1
Max. blade speed min
Mitre (max. positions) left and right
Bevel (max. positions) left
Compound mitre bevel
mitre
Capacities
cross-cut 90° mm
mitre 45° mm
mitre 48° mm
bevel 45° mm
bevel 48° mm
Overall dimensions mm 460 x 560 x 430 460 x 560 x 430 460 x 560 x 430
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L (acoustic power) dB(A)
WA
K (acoustic power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
6
WALT one of the most
E
DW770 DW771 DW777
230 230
230/115 230/115 230/115
1 2
1600 1550/1400 1800/1600
216 216
30 30
6300 2600-5200 6300
50° 50°
48° 48°
45° 45°
45° 45°
60 x 270 60 x 270 60 x 270
60 x 190 60 x 190 60 x 190
60 x 180 60 x 180 60 x 180
48 x 270 48 x 270 48 x 270
45 x 270 45 x 270 45 x 270
14.0 15.0
93 91
3 3
104 102
3.9 3.2
2.1 2.1
1.5 1.5
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of
0.25 Ohm at the interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
Defi nitions: Safety Guidelines
230
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
2
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
216
WARNING: Indicates a potentially hazardous situation
30
which, if not avoided, could result in death or serious
injury.
50°
CAUTION: Indicates a potentially hazardous situation
48°
which, if not avoided, may result in minor or moderate
injury.
45°
45°
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
15.0
Denotes sharp edges.
93
EC-Declaration of Conformity
MACHINERY DIRECTIVE
3
104
3.9
DW770, DW771, DW777
D WALT declares that these products described under Technical Data
E
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
2.1
These products also comply with Directive 2004/108/EC and 2011/65/
EU. For more information, please contact D
1.5
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.01.2010

Safety Instructions

WARNING! When using electric tools basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury including the
following.
Read all these instructions before attempting to operate this product
and save these instructions.
WALT at the following
E
WALT.
E