Indicator Lamps - Cadillac 2014 SRX Owner's Manual

6. Connect the electrical connector.
7. Install the cap with the down
arrow pointing down in the back
of the headlamp assembly.
8. For driver side, reinstall the
underbonnet electrical centre
cover by latching three clips.
9. For passenger side, reinstall the
air filter/cleaner assembly base
by pushing to seat. Verify the
base is seated securely, then
install the engine air filter/
cleaner assembly.
Front Indicator Lamp (Base
and Uplevel)
To replace the front indicator lamp:
1. Remove the indicator lamp bulb
socket from the headlamp
assembly.
2. Remove the indicator lamp bulb
from the socket.
3. Replace the bulb in the bulb
socket.
4. Install the bulb socket in the
headlamp assembly.
5. For the driver side, reinstall the
under bonnet electrical centre
cover by latching three clips.
6. For the passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat. Verify
the base is seated securely, then
install the engine air filter/
cleaner assembly.

Indicator Lamps

To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2-11.
Vehicle Care
2. Remove the push pin (1) on the
tail lamp cover (2).
3. Remove the tail lamp cover from
the lamp assembly by pulling
rearward from the top to
unfasten the snap tabs.
10-29