Cooling System - Cadillac 2014 SRX Owner's Manual

Hide thumbs Also See for 2014 SRX:
Table of Contents

Advertisement

4. Disconnect the electrical
connector (2). First, remove the
connector lock clip located at the
bottom of the connector, then
press on the top and bottom of
the connector to remove.
5. Lift the 3 retaining clips (3) on
the air filter housing.
6. Tilt and lift the cover slightly
upwards and slide the cover
away from outside edge of the
vehicle. Remove the air filter.
7. To install the air filter, place filter
inside box where the pleats fit in
between the tabs located inside
the lower box. Ensure that the
cover cut outs (1) on both sides
match the air filter tabs (2) on
both sides.
8. Replace air cleaner cover by
inserting the 4 tabs into the 4
slots. Lower cover to meet
bottom of box. Place the 3
retaining clips (3) on retention
features and clip closed.
9. Reconnect outlet duct to cover
and tighten the air duct
clamp (1).
10. Reconnect the electrical
connector (2). Install connector
lock clip to bottom of
connector.
Warning
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.
Vehicle Care
Caution
If the air cleaner/filter is off, dirt
can easily get into the engine,
which could damage it. Always
have the air cleaner/filter in place
when you are driving.

Cooling System

1. Engine Cooling Fan (Out
of View)
2. Engine Coolant Surge Tank and
Pressure Cap
10-11

Advertisement

Table of Contents
loading

Table of Contents