Sanyo LCD-32XR10F Service Manual page 16

5、 HDMI input signal flow
HDMI video signal is sent into main chip MSD209GL to be processed by modules of video decoding,
video processing and zoom, then LVDS signal will be outputted to drive display panel;
HDMI audio signal is sent into main chip MSD209GL for audio processing, preamplification, acoustic
effect processing and volume control, then it is sent to earphone amplifier BH3547F to be amplified,
one is sent to earphone jack, the other is sent to digital audio power amplifier R2A15112 to be
amplified and then drive speakers.
6、 AV input signal flow
Current active AV video signal is sent into main chip MSD209GL for video coding, then it is amplified
by peripheral video amplified circuits and then outputted;
Current active AV audio signal is sent into main chip MSD209GL for preamplification, acoustic effect
processing and volume control, then it is sent to operation amplifier to be amplified and then
outputted.
Brief Instruction of the Unit
MPEG-2 MP@HL、H.264 Main and High profile up to Leve4.0 Decoding
MPEG、Dolby Digital（AC-3） 、Digital audio decoding (AAC)
3D comb filter
Wide range power supply, low power consumption in standby mode（≤1W）
Audio power amplifier (class D), HI-quality acoustic effect output
Hi-quality processing of interlaced to progressive scanning
Real integrative functions realization:
- Integrative structure
- Integrative Tuner (A/D integration)
- Channel-searching integration
- OSD interface integration
Main components of the unit:
32" LCD panel（1920X1080）
Main chip：MStar MSD209GL-LF
Demodulator chip：MStar MSB1210-LF
Tuner：NXP FT2119
DDR：SAMSUNG K4T1G164QE-HCF7
Power amplifier (class D)：RENESAS R2A15112
FLASH ：MX25L6405DMI-12G
External interfaces of the unit:
Two groups of Video and one group of RCA L/R input
Three groups of HDMI input
One group of VGA input
One group of audio input For VGA and DVI（Mini Phone Jack）
Two groups of YPBPR以及 RCA L/R input
One group of RF
One group of RS232（Mini Phone Jack）
One group of audio output（Mini Phone Jack）