Oki B4350 Service Manual page 56

LCD
Status level
Error LOAD mmm
tttt EMPTY
Error CLOSE COVER
TRAY2 COVER OPEN
Error CHANGE PAPER TO
mmmm/pppp
tttt MEDIA MISMATCH
Error CHANGE PAPER TO
mmmm/pppp
tttt SIZE MISMATCH
Error RS232C
OVERFLOW
Error RS232C
OVER RUN
Error RS232C
PRY ERR
Error RS232C
FRM ERR
Error NETWORK
INITIAL
Error TONEREMP
CHG CART
Error MEMORY
OVERFLOW
Error OPEN UPPER COVER
PAPER SIZE ERROR
Error CHECK tttt
PAPER JAM
Error OPEN UPPER COVER
PAPER JAM
42641101TH Rev.1
Table 5-1 (3/5)
LED
No Light Indicates that a print request was sent to the tttt tray that has
become empty. A message for setting mmmm paper.
TRAY1
TRAY2
MPF * Scroll display.
No Light Print request has been made to the 2nd tray route cover open. To
continue, close cover. * Scroll display
No Light The media type in the tray and the edit media type do not match.
TRAY1
TRAY2
MPF
No Light The paper size in the tray and the edit size do not match.
TRAY1
TRAY2
MPF
No Light RS232C Overflow has Occurred.
To continue, press ON-LINE switch(RS232C related)
No Light RS232C Over Run has Occurred.
To continue, press ON-LINE switch(RS232C related)
No Light RS232C Parity Error has Occurred.
To continue, press ON-LINE switch(RS232C related)
No Light RS232C Framing Error has Occurred.
To continue, press ON-LINE switch(RS232C related)
Varies Initializing (rebooting) a section related to NIC.
MSG blinks only on the top LCD line. (NIC-related)
No Light Toner Low has passed, and almost no toner is left in the cartridge. For
temporary operation, open/close the cover or press "ON-LINE" switch, to
recover the printer operation. But basically you must change the toner
cartridge.
Displayed after printing 100 sheets after Toner Low was sensed, to
prompt the user to change the cartridge. after this, the printer
recovers with Cover Open/Close or when user presses "ON-LINE"
switch, then, after printing 30 pages, this message is displayed.
Even after this, the printer recovers when the user opens and
closes the cover, or he presses the "ON LINE" switch, but this
message is displayed for each sheet ejected.
During Change Drum Alarm, however, "CHG DRUM /(the lower line
spaces), not this message, is displayed, to prompt the operator to
replace the drum, and prevent him from replacing the toner.
No Light Memory capacity has overflowed due to the following reasons. To
continue, press ON-LINE switch. Install expansion RAM or de-
crease the data amount.
- Too much print data in a page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer compression, overflow has occurred.
* Scroll display
No Light Warns that paper of the inappropriate size has been fed from the
tray. Check whether Multi-feed has happened.
To continue for Recovery Print, open and close the cover.
* Scroll display
No Light Paper jam occurred when paper was being fed from tttttt tray.
TRAY1
TRAY2
MPF * Scroll display
No Light Jam has occurred in the paper path.
Paper Feed
Transport (Message of 10.5 is displayed)
* PN262 does not distinguish jam type or tray.
* Only Exit jam is identified.
* Scroll display
Descroption
* Scroll display
* Scroll display
Oki Data CONFIDENTIAL
56 /