Sensor Plate (Inlet) - Oki B4350 Service Manual

2.3.17 Sensor Plate (Inlet)

(1) Remove the upper cover (see 2.3.1).
(2) Remove the operator panel assy (see 2.3.3).
(3) Remove the face up stacker assy (see 2.3.8).
(4) Remove the lower base unit (see 2.3.4).
(5) Unlock the latch at the left side of the paper guide (R) 1 and remove the paper guide (R) 1.
(6) Press the clamps of three sensor plates (inlet and paper) 2, and remove them by pressing them
upward from the bottom. When removing the sensor plates, take care not to lose the springs.
42641101TH Rev.1
2
2
Sensor plate (paper)
Spring sensor IN
2
Sensor plate (inlet)
1
Spring sensor write
2
Spring sensor IN
Sensor plate (inlet)
Oki Data CONFIDENTIAL
37 /