Specifications - Hitachi C 9U2 Service Manual

5. SPECIFICATIONS

Model
Saw blade diameter
at 90û
Cutting depth
at 45û
Power source
Type of motor
Type of switch
Housing
Handle cover
Gear cover
Enclosure
Saw cover
Lower guard
Base
Voltage (V)
* Current (A)
* Power input
No-load
Rotation speed
Full-load
** Net
Weight
Gross
Gross (with case)
Packing
Type
Cord
Overall length
Standard accessories
Optional accessories
* Be sure to check the name plate on product as it is subject to change by areas.
** Measured weight excludes cord, guide and saw blade.
C 9U2
235 mm (9-1/4")
0 to 86 mm (0 to 3-3/8")
Max. 65 mm (2-9/16")
AC single phase
AC single phase commutator motor
Trigger switch
Polycarbonate resin, elastomer
Polycarbonate resin, elastomer
Die-cast magnesium alloy
Polycarbonate resin, elastomer
Die-cast aluminum alloy
Die-cast aluminum alloy
110
16
1,670 W
2,680 min -1
Corrugated cardboard box/Plastic case and corrugated cardboard sleeve
Two-core cabtire cable
2.5 m (8.2 ft.)
Tungsten carbide tipped (TCT) saw blade
Hex. bar wrench
Guide
Wing bolt
Dust collector
Lever (short type)
Washer (A) ... for 16 mm (hole dia. of saw blade)
... for 30 mm (hole dia. of saw blade)
Guide rail adapter
--- 5 ---
5,000 min -1
3,360 min
6.8 kg (15.0 lbs)
9.0 kg (19.8 lbs)
11.5 kg (25.4 lbs)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
C 9BU2
230
9.2
2,000 W
-1
1