Freestanding Electric Fireplace V50HYLC SHOWN Installation Instructions and Homeowner’s Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. FOR YOUR SAFETY DO NOT STORE...
USING THIS APPLIANCE WE ARE PLEASED THAT YOU HAVE CHOSEN TO PURCHASE AN ELECTRIC FIREPLACE MANUFACTURED BY NANJING PRO-COM ELECTRIC APPLIANCE CO., LTD IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.
GENERAL Read all instructions before using this appliance. 13. When this appliance is installed, it must be This appliance is hot when in use. To avoid burns, do electrically grounded in accordance with local not let bare skin touch hot surfaces. Keep codes with the current CSA C22.1 Canadian local combustible materials, such as furniture, pillows, codes of for USA installations.
CLEARANCE TO COMBUSTIBLES WARNING: Electrical outlet wiring must comply with local building codes and all other applicable Back………………2”/50.8mm regulations to reduce the risk of Sides……………..6”/156.4mm fire, electrical shock and injury. Floor……………..0”/0mm Top……………….24”/610mm WARNING: this fireplace if any part of it has been ELECTRICAL CONNECTION under water.
GLASS INFORMATION MAINTENANCE OF MOTORS The motors used on both blowers fan and flame Under no circumstances should this product be operated with missing or simulator assembly prelubricated extended warranty of the motor, no further lubrication broken glass. is required. However, periodic cleaning/vacuuming of Do not strike or slam the glass.
This section provides easy step by step instructions for operating your fireplace. 1. Make sure the unit is unplugged from the power source (see warning on page 6) 2. Plug the heater into a 15AMP/120volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1900 watts.
Page 7
Warning: Before servicing this heater be sure to unplug heater from wall outlet. Do not only turn off heater from the main “ON/OFF” switch, be sure to unplug this heater. (Adaptor NOT permitted in Canada) Under CZ22.2 NO. 0 standard SPECIFICATIONS: Model: V50HYLD Model:V50HYLC Voltage: 120V/60HZ Total Amps: 11.3A Voltage: 120V/60HZ Total Amps: 11.3A...
V50HYLC Item # Part Description Part Number VC Top Panel Right Part VL107-02Q Fan/Heater Assembly NFHTX186/V Synchronization Motor-120Volt AC w/Terminal VL051-01 Cord Power 16/3 HPN w/Terminals NFHL008-A ON/OFF Switch VL067-01 VC Top Panel Left Part VL107-02Q VC Top Panel (Middle Part)
Page 10
V50HYLD Item # Part Description Part Number Top Panel VL107-02F Fan/Heater Assembly NFHTX186/VB17-000G Synchronization Motor-120Volt AC w/Terminal VL051-01 Cord Power 16/3 HPN w/Terminals NFHL008-A ON/OFF Switch VL067-01 Left Side Panel VL101-01P Right Side Panel VL101-02P Flame Generator Assembly VB17001-C-3 Light Bulb Socket w/Wiring Assembly VL054-01 Door VL108-01...