Download  Print this page

Pro-Com SFE23RE-C Installation Instructions Manual

Freestanding electric fireplace
Hide thumbs

Advertisement

SFE23RE SHOWN
Installation Instructions and Owner's Manual
WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE
MAY RESULT CAUSING PROPERTY, PERSONAL INJURY OR LOSS OF LIFE.
ANSI/UL1278. MOVABLE AND WALL-OR CEILING HUNG ELECTRIC ROOM HEATERS
INSTALLER: DO NOT DISCARD THIS MANUAL-LEAVE FOR HOME OWNER
PRO-COM
SFE23RE-W
SFE23RE-C
SFE23RE-O
SFE23RE-DO
Freestanding
Electric Fireplace
FOR YOUR SAFETY
OR USE GASOLINE OR OTHER
FLAMMABLE VAPORS OR LIQUIDS
IN THE VICINITY OF THIS OR ANY
OTHER APPLIANCE
1
SFE33RE-W
SFE33RE-C
SFE33RE-O
SFE33RE-DO
DO NOT STORE
PC-FE23A610-0506

Advertisement

Table of Contents
loading

  Related Manuals for Pro-Com PRO-COM SFE23RE-C

  Summary of Contents for Pro-Com PRO-COM SFE23RE-C

  • Page 1 SFE23RE SHOWN Installation Instructions and Owner’s Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY, PERSONAL INJURY OR LOSS OF LIFE. ANSI/UL1278. MOVABLE AND WALL-OR CEILING HUNG ELECTRIC ROOM HEATERS INSTALLER: DO NOT DISCARD THIS MANUAL-LEAVE FOR HOME OWNER PRO-COM SFE23RE-W SFE23RE-C...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PLEASE READ THE INSTALLATION & OPERATION INSTRUCTIONS BEFORE USING THIS APPLIANCE WE ARE PLEASED THAT YOU HAVE CHOSEN TO PURCHASE AN ELECTRIC FIREPLACE MANU- FACTURED BY NANJING PRO-COM ELECTRIC APPLIANCE CO., LTD IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.
  • Page 3: Important Instructions

    IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using this heater. This appliance is hot when in use. To avoid burns, do not come in contact with heater.
  • Page 4: Locating Your Electric Fireplace

    LOCATING YOUR ELECTRIC FIREPLACE Your new freestanding electric fireplace may be installed vir- tually anywhere in your home. However when choosing a location for your new electric fireplace, ensure that the gen- eral instructions are followed. For best effect results, install the electric fireplace out of direct sunlight.
  • Page 5: Maintenance Of Motors

    MAINTENANCE OF MOTORS The motors used on the fan and flame genera- tor assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater unit is recommended. WARNING: Make sure that the power is turned off before proceeding.
  • Page 6: Operating Instructions

    Heater Front View Remote Control Front Operating Instructions Remote Control Back Before programming your transmitter you must first insert three triple “AAA” batteries. Make sure the main power on/off swith is in “ON” position. 1. The Mode setting: Press the “SET” button, then the “AUTO” light will flash.
  • Page 7 2. The Clock setting : Press the “CLOCK” button, the figure shown on clock will flash. Press to set the hour. After the hour has been set, press the “CLOCK” button again to set the minutes. After the minutes has been set, press the “CLOCK” button, the clock will indicate the set time.
  • Page 8: Specification

    SPECIFICATIONS: Model: SFE23RE-W (-C, -O, -DO) Voltage: 120V/60HZ Total Amps: 11.5A Total Watts: 1380W Heating Ratings: 1200W Dimensions, Inches (H x W X D) 38x39 1/2x15 5/8 Fireplace 42 1/2x41 3/8x17 5/16 Carton Weight, Pounds Fireplace Shipping Replacement Parts (Logs for SFE33) Model: SFE33RE-W (-C, -O, -DO) Voltage: 120V/60HZ Total Amps: 11.5A...
  • Page 9: Replacement Parts List

    Replacement Parts List SFE23RE-X* * -X represents -W(White), -C(Cherry), -O(Oak), -DO(Dark Oak) It e m P a r t D e s c r ip t io n L o g S e t C o n tr o l B o x R e c e i v e r F a n H e a te r A s s e m b ly D C M o to r...
  • Page 10: Installing Decorating Logs

    Installing logs for SFE23RE: FIG 1 - Logs for SFE23RE FIG 2 1.Insert the two pins on log 1 to the two recessed holes at the middle of grate. (See FIG 2). FIG 3 2.Insert the pin on one end of log 2 to the recessed hole on log 1, with the other end of log 2 placed on the ember bed (where marked).