Menus - Paradox NVX80 Reference And Installation Manual

High end motion detector with anti-mask for indoor/outdoor use
Hide thumbs Also See for NVX80:
Table of Contents

Advertisement

Menus

Menu-Driven Settings and Configuration
The NVX80 introduces a unique 4-button interface and full-color OLED display screen. The NVX80 is completely menu-
driven, making programming and configuration simple. There are no jumpers, trimmers or complex wiring to contend with.
The OLED screen displays a variety of icons which indicate the current state of the detector. Alarm, pre-alarm,
and anti-mask events as well as notifications are displayed on the OLED. The menus provide direct control of the
detector's operation, the sensitivity level settings, display characteristics and more.
To protect against malicious activity, the NVX80's menus and button interface are active only when the tamper
screw at the bottom of the unit is open. The menus and button interface become functional only after a tamper
event is issued.
Installation specific settings can be saved and restored if altered. Settings can also be reset to factory defaults, all
with the push of a button.
The following items are included in the NVX80 main menu: PIR, Microwave, Anti-Mask, Alarm Condition, Input,
Output, Diagnostics, Settings, About and Language. Via the menu these features can be activated, sensitivities set
and tested, input and outputs can be defined and product information can be viewed.
Back
used to return to a
previous menu, cancel
without making changes
and to exit the test mode
Main Menu
PIR
Microwave (MW)
IR Anti-Mask
Alarm Condition
Wall Tamper
Outputs
Diagnostics
Settings
About
Language
NVX80 Version 1.02
Set and test PIR modes and sensitivity
Set and test MW sensitivity and MW anti-mask
Set, calibrate and test anti-mask function
Set the combination logic of PIR and MW
Currently supports only PIR and MW
Control tamper input settings
Define functionality of the relays
Test the detectors settings and bus operation
Control display options, enable/disable notifications, save, restore or reset settings
to factory defaults
Shows the detectors firmware version, serial number and BUS zone number
Currently English only
Down / Up
used to scroll through menus and
increase/decrease sensitivity
OK
used to enter and
confirm selections
9

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Paradox NVX80

Table of Contents