For Parts Call K&T 606-678-9623 or 606-561-4983 Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l’outil au détaillant. 1-800-554-6723 www.poulan.com Instruction Manual Manual de Instrucciones Manuel d’Instructions ES350 WARNING: Read and follow all Safety Rules and Operating Instructions before...
For Parts Call K&T 606-678-9623 or 606-561-4983 SAFETY RULES dication. You must be in good physical WARNING: When using electric condition and mentally alert. If you gardening appliances, basic safety pre- have any condition that might be ag- cautions must always be followed to re- gravated by strenuous work, check duce the risk of fire, electric shock, and with doctor before operating.
For Parts Call K&T 606-678-9623 or 606-561-4983 S Keep the handles dry and clean and larized extension cord only one way. If free from oil and grease. the plug does not fit fully into the exten- S Keep oil cap and fasteners securely sion cord, reverse the plug.
For Parts Call K&T 606-678-9623 or 606-561-4983 GUARD AGAINST KICKBACK S Recognize that kickback can happen. Follow all safety rules to help avoid kick- With a basic understanding of kickback, back and other forces which can result in you can reduce the element of surprise serious injury.
For Parts Call K&T 606-678-9623 or 606-561-4983 Small Radius Right Hand Left Hand Tip Guide Bar Large Radius Tip Guide Bar S Low Kickback Chain has met kickback performance requirements when tested on the representative sample of these chain saws specified in ANSI B175.1.
For Parts Call K&T 606-678-9623 or 606-561-4983 SAFETY NOTICE: Exposure to vibra- double insulation system only provides tions through prolonged use of hand added protection against injury resulting tools could cause blood vessel or nerve from an internal electrical insulation damage in the fingers, hands, and joints failure.
For Parts Call K&T 606-678-9623 or 606-561-4983 OPERATION KNOW YOUR SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR Compare the illustrations with your unit to familiarize yourself with the CHAIN SAW. location of the various controls and adjustments. Save this manual for future refer- ence.
For Parts Call K&T 606-678-9623 or 606-561-4983 GUIDE BAR AND CHAIN OIL STOPPING YOUR SAW S Release the trigger switch. The bar and chain require lubrication. The chain oiler provides lubrication to the S If motor does not stop, disconnect chain and guide bar.
Page 9
For Parts Call K&T 606-678-9623 or 606-561-4983 S Remove dirt, stones, loose bark, nails, NOTE: Before felling cut is complete, staples, and wire from the tree where use wedges to open the cut when cuts are to be made. necessary to control the direction of fall. To avoid kickback and chain damage, Plan a clear retreat path use wood or plastic wedges, but never...
For Parts Call K&T 606-678-9623 or 606-561-4983 Using a log for support Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pressure. Overcutting Undercutting Undercutting involves cutting on the un- derside of the log with top of saw against the log.
For Parts Call K&T 606-678-9623 or 606-561-4983 LIMBING S Make your first cut of the way S Limb a tree only after it is cut down. through the bottom of the limb. This S Leave the larger limbs underneath the cut will make the limb sag so that it falls felled tree to support the tree as you easily on the second cut.
For Parts Call K&T 606-678-9623 or 606-561-4983 CHECK FOR LOOSE FASTENERS WARNING: If the saw is operated AND PARTS with a loose chain, the chain could jump S Bar Clamp Nuts off the guide bar and result in serious in- S Chain jury.
For Parts Call K&T 606-678-9623 or 606-561-4983 LUBRICATION INSPECT AND CLEAN UNIT AND LABELS Bar Oil Fill Cap S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild detergent.
For Parts Call K&T 606-678-9623 or 606-561-4983 CUSTOMER SERVICEABLE PARTS WARNING: Use of any other ac- Inside view of cessory or attachment might present a Bar Clamp risk of injury to the operator. Adjusting pin hole REPLACEMENT PART PART NO. Adjusting Hex Nuts 530015917...
For Parts Call K&T 606-678-9623 or 606-561-4983 TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect from the power source be- fore performing all of the recommended remedies below except remedies that require unit to be operating. TROUBLE CAUSE REMEDY Chain does 1.
For Parts Call K&T 606-678-9623 or 606-561-4983 WARRANTY STATEMENT ELECTROLUX HOME PRODUCTS, THIS WARRANTY GIVES YOU SPECIFIC LE- INC., warrants to the original purchaser GAL RIGHTS, AND YOU MAY HAVE OTHER that each new Poulan brand electric or RIGHTS WHICH VARY FROM STATE TO cordless product is free from defects in STATE.NO CLAIMS FOR CONSEQUENTIAL material and workmanship and agrees to...
Need help?
Do you have a question about the ES35 and is the answer not in the manual?
Questions and answers