Door Lock; Switching The Machine To Standby Mode; End Of Program - Beko WMA 767 W Installation & Operating Instructions And Washing Guidanse

Softener
Symbol lights up at the beginning of
softener step.
Spin
Symbol will light up at the beginning of
the final spinning – after the final rinse or
during Spin and Pump special programs.
If the machine is not spinning,
program may be at rinse hold mode
or automatic spin correction system is
activated due to excessive unbalance.
Chamnging the Position of the
Program Selection Key after
the Program Has Started:
The selected spin speed and program
temperature fades out. An empty frame
appears.
When the program selection button is
brought to the appropriate position, rpm
and temperature data reappear.
Spin
+
Time
Delay
F1 F2
Prewash Quick
Wash
Switching the Machine to
Standby Mode:
Machine is switched to standby mode by
pressing Start/Pause/Cancel Button
(11) for a short time. Standby Symbol
(14k) that indicates the machine is in
standby mode lights up and the Start
Symbol (14j) that shows the program has
started and is still continuing fades out.
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is in.
Door can be opened if the water level is
suitable; the Door Locked Symbol (14i)
will flash until the door lock is released and
ths symbol fades out when the door lock
is opened.
Temperature
Start
Pause
Cancel
F3 F4
Extra Anti-
Rinse Crease

Door Lock

Door Locked Symbol (14i) lights up
when the loading door is locked. It
continues flashing until the lock is ready to
open. Do not force the door at this stage.
When the door is ready to be opened, the
symbol will fade out.
Child-proof Lock
You can protect the appliance from
children's prying by means of the child-
proof lock. If this is the case, no change is
made in the running program,
2. and 4. by pressing the auxiliary
functions, the machine is switched to
child-proof lock. "
lock activated) label is displayed on
the screen. The same label will appear
whenever any button is pressed during
child-proof lock mode.
Spin
+
Time
Delay
F1
Prewash Quick
Wash
Deactivaing the Child-proof
Lock:
When the child-proof lock is activated, the
child-proof lock is deactivated by pressing
2nd and 4th auxiliary functions.
" " (Child-proof lock is
deactivated) label appears on the screen.
Spin
+
Time
Delay
F1
Prewash
Quick
Wash

End of Program

When the program is finished, the symbols
of the relevant steps will remain lighted
up and the auxiliary function, spin and
16
" (child-proof
F2 F3 F4
Extra Anti-
Rinse Crease
F2 F3 F4
Extra Anti-
Rinse Crease
Temperature
Start
Pause
Cancel
Temperature
Start
Pause
Cancel