Magnavox MDVDVCR5 Manual page 25

4. RF Output Set
In case, your VCR RF output interface the TV
channel output, your need to change the RF
setup as per following steps.
(1) Press the [SETUP] button to call the Setup
Menu in TV mode.
Press the [ / ] buttons to select the line of
"Installation" and press the [ENTER] button
to confi rm that.
(2) Press the [ / ] buttons to select the line of
"RF Output Set" and press the [ENTER] button
to confi rm that.
(3) The initial channel number is CH36 and it can
be adjusted from CH21 to CH69.
Press the [0-9] buttons to setup the desired PR
numbers.
And the [SETUP] button is pressed to interrupt
before confi rming the new data, the Main
SETUP will appear without the data change.
Note: The 36 or BG means will blinks till
36 or BG input in the data.
Clock set
Record timer
Installation
Search
Preferences
ENTER: Confirm
INSTALLATION
Auto installation
Manualinstallation
Organizer
RF outputset
ENTER: Confirm
RF OUTPUTSET
CH
ENTER: Confirm
25
SETUP
SETUP: End
SETUP: End
36
SETUP: End