Table of Contents
Advertisement
Cleaning and care
Changing an overhead light
The halogen lights become very hot
when in use.
They can cause burns even after
being shut off for some time.
Allow them to cool down for a few
minutes before changing them.
Disconnect the hood from the
electrical supply before replacing the
lamps (see "IMPOARTANT SAFETY
INSTRUCTIONS").
22
Remove the grease filters.
Turn the bolt counterclockwise as far
as it will go. The halogen lamp will
then drop down towards you.
Turn the light counter clockwise and
pull it out.
Replace it with a new lamp of the
same type: GU/GZ 10, 120 V, 50W.
Refit the lamp by reversing the steps
shown above. Please observe
manufacturer's instructions.
Replace the grease filter.
Hide quick links:
Advertisement
Table of Contents
