Minelab X-Terra 50 Manual page 65

The display window may be prone to
scratching or damage if not treated with
care. A protective control box cover is
available. (Protective Accessories, pg. 68)
Ensure the coil cable is in good
condition and not subject to undue
stress (particularly where it is connected
to the coil).
Always remember to turn off the
detector before changing coils.
Previous Minelab coils will not function
with the X-Terra detector.
Old, flat or faulty batteries may cause
many detector problems, through
electrolyte leakage. Take the batteries
out if the detector will not be used for
long periods of time (e.g. more than 1
week). Ensure that only good quality
batteries are used and that they are
replaced when the low battery signal
Do not use rechargeable Lithium Ion
batteries as their voltage is too high.
Non rechargeable Lithium batteries
may be used.
65