Certified Product Summary; Service Information - Motorola WS 2000 Configuration Manual

Introduction

Certified Product Summary

Manufacturer:
Approved products:
RF technology:
Radio frequency:
Quality of service:
Security:
Wireless Switch firmware version certified:
SpectraLink handset models certified: **
SpectraLink handset software certified:
SpectraLink radio mode:
Maximum telephone calls per AP:
Recommended network topology:
Denotes products directly used in VIEW Certification testing
†
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as "SpectraLink Wireless Telephones".

Service Information

PN: 1725-36066-001_D.doc
Polycom's Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink Wireless Telephones and WLAN
infrastructure products.
The products listed below have been thoroughly tested in Polycom's
lab using the VIEW Certification Test Plan. This document details
how to configure the WS 2000 Wireless Switch and the AP 300 access
point (AP) with SpectraLink Wireless Telephones.
Motorola:
http://support.symbol.com/support/product/manuals.do
Wireless Switch
WS 2000
802.11b/g
2.4 – 2.484 GHz
SpectraLink Voice Priority (SVP)
WPA-TKIP (PSK), WPA2-CCMP (PSK)
2.2.1.0-018R
e340/h340/i640
89.134
802.11b
Switched Ethernet
If you encounter difficulties or have questions regarding the
configuration process, please contact Motorola technical support at
(800) 653-5350, or at
http://www.symbol.com/services/contactsupport.
Motorola WS 2000 with AP 300
†
122.010 or greater
802.11b
8 8
Access Point
†
AP 300
8020/8030
802.11g 802.11a
Not certified
3