Searching For And Viewing Recorded Video - Philips System4 Seriver Installation Instructions Manual

Although it follows the weekend default, the holiday is now a custom schedule. If you later change the default
weekend schedule, the holiday's schedule will not change. In that case, you must again copy and paste the new weekend
default to the holiday.
After you have set up the weekday, weekend, and holiday schedules, click Record.
4.4

Searching for and Viewing Recorded Video

The System4 Server Configuration software provides a search function to allow you to find recorded video. To search
for video, you must enter a time period (starting time and stopping time) and the type of video you are looking for
(motion events, alarm events, or all video).
Performing a Search
1. Click the Search function button to go to the Search page.
2. In the From: field, enter the starting date (month/day/year) of your search period in the first field by clicking
the numbers and typing your date. You can also use the down arrow to call up a calendar of the current
month and then click a date or use the side arrows to choose a different month.
3. In the other segment of the From: field, select a starting time (hour:minute:second:am/pm). You can click the
numbers and type in your entries, or you can use the arrows provided to change the numbers incrementally.
4. Repeat steps 2 and 3 in the To: field to enter the stopping date and time for your search period.
5. Click the Motion or Alarm boxes if you want to search only for video captured in Motion mode, Alarm
mode, or both. If you leave these boxes blank, the system will search for all types of video.
6. In the Include Cameras list, click all of the cameras whose video you want to search. If you leave all inputs
blank (or click the Clear button to make all of them blank again), the system will search for video from all
cameras.
7. Click the Search button.
30