Change The Wifi Password Or Security Level - NETGEAR AC1200 R6220 User Manual

4. Select Wireless.
5. For the 2.4 GHz WiFi band, in the Wireless Network (2.4 GHz b/gn/n) section, select a
setting from the Mode list.
Up to 300 Mbps is the default setting. The other settings are Up to 145 Mbps and Up to
54 Mbps.
6. For the 5GHz WiFi band, select a setting from the Mode list.
Up to 867 Mbps is the default setting, which allows 802.11ac and 802.11a wireless
devices to join the network. The other settings are Up to 400 Mbps and Up to 173 Mbps.
7. Click the Apply button.
Your settings are saved.

Change the WiFi Password or Security Level

Your router comes with preset WPA2 or WPA security. The password that you enter to
connect to your network is unique to your router and is on the router label. NETGEAR
recommends that you use the preset security, but you can change the settings.
NETGEAR recommends that you do not disable security.

To change the WPA settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
AC1200 Smart WiFi Router with External Antennas
Network Settings
120