Before Applying Power; Internet Connection - Kenwood Sovereign Entre Connection And Setup Manual

Connecting and Setting Up Your New Kenwood Sovereign Entre
Before Applying Power
Read this section carefully to ensure safe operation.
Kenwood Sovereign Entre is designed for operation on AC 120 V only. Entre
use an outlet controlled by a switch, or the switched power outlet on your
must be connected to a 120V AC outlet that supplys constant voltage. Do not
Entre or other audio component.
Safety Precautions
Read this section carefully to ensure safe operation.
Prevent electric shock:
*Do not expose your Entre to rain or moisture.
The following icons indicate the presence of uninsulated dangerous voltage
that may be of sufficient magnitude to cause electric shock:
*Do not remove the cover (or back). There are no user
serviceable parts inside. If your Entre requires repair, take it to
an authorized service outlet.
A
Internet Connection
Many of Entre's capabilities, including downloading CD information,
connecting to Internet radio stations, or automatic software updates, require a
specific type of Internet connection.
Because free ISPs, AOL, and CompuServe do not use
standard methods of Internet connectivity, and do not open
their networks to outside users, you can not use these ISPs
with Entre.
You must have a third-party Internet service provider (ISP) to access those
features.
To obtain an ISP via OpenGlobe, begin the Quick Start Setup
process (see "How Do I Power-Up Entre for the Very First
Time?" on page 19) and call the toll-free number given to
you during the proccess.
How Do I Reset Entrb?
If Entre fails to respond to front panel or remote commands or if it responds
erroneously, use the following procedure to reset it:
l
Hold the
POWER
button down until the Standby Indicator begins to flash
on and off. Then release the
POWER
button.
l
When the Standby Indicator stops flashing and is lit constantly, push the
POWER
button to turn Entre on.
iv How to Connect and Set Up Your Entre Entertainment Hub