Kenwood Sovereign Entre Connection And Setup Manual page 13

How Do I Connect to My Kenwood Sovereign DVD or CD Changer?, continued
How Do I Connect to My Kenwood Sovereign DVD or CD Changer?, continued
Entre can control the following Kenwood DVD and CD changers:
.
DVD: DV-5900M, DV-5050M
l
CD: CD-425M, CD-4700M
Do not plug in Entre or devices to AC power until you have connected all your
devices.
Connect the included RS-232D cable from the DVD or CD changer's RS-
232D jack to Entre's RS 232C to CD/DVD Changer jack as shown.
The RS-232C cable included with Entre has female
connectors at both ends. If you are substituting a commercially
available RS-232C cable, make sure that it has female
connectors on both ends.
For all other connections between the DVD/CD changer and receiver/
amplifier, refer to the instruction manuals for those components.
If you are using Entre with a Kenwood Sovereign DVD
changer and a non-Kenwood Sovereign receiver, follow the
connection instructions on pages 8-9.
If you are daisy-chaining more than one Kenwood Sovereign
DVD changer, Entre will only control the changer in the chain
designated 'Main', not those designated 'Sub 1' and 'Sub 2'.
How to Connect and Set Up Your Entre Entertainment Hub