Manage The Application Level Gateway - NETGEAR N150 D500 User Manual

Manage the Application Level Gateway

The Application Level Gateways (ALGs) for the Session Initiation Protocol (SIP) and for the File
Transfer Protocol (FTP) are enabled by default for enhanced address and port translation.
However, some types of VoIP and video traffic might not work well when the SIP ALG is
enabled, and some types of FTP transfers might not work well when the FTP ALG is enabled.
For this reason, the modem router provides the option to disable the SIP ALG and the FTP
ALG.

To change the default ALG settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
N150 and N300 WiFi DSL Modem Routers
Manage the WAN and LAN Network Settings
70