Removing The Heatsink Assembly; Installing The Heatsink Assembly; Removing The Heatsink Fan - Dell Precision Tower 5810 Owner's Manual

10. Follow the procedures in

Removing the Heatsink Assembly

1. Follow the procedures in
2. Remove the computer
3. Perform the following steps:
a. Disconnect the heatsink fan cable from the system board [1].
b. Loosen the captive screws that secure the heatsink assembly [2].
c. Lift the heatsink assembly and remove it from the computer [3].

Installing the Heatsink Assembly

1. Place the heatsink assembly inside the computer.
2. Tighten the captive screws to secure the heatsink assembly to the system board.
NOTE: Mis-alignment of screws can damage the system.
3. Connect the heatsink cable to the system board.
4. Install the computer
5. Follow the procedures in

Removing the Heatsink Fan

1. Follow the procedures in
2. Remove:
a. computer cover
b. heatsink assembly
3. Perform the following steps:
a. Remove the screws that secure the heatsink fan from the assembly.
b. Push the grommets outward to release the heatsink fan from the assembly.
c. Remove the heatsink fan from the heatsink assembly.
34
After Working Inside Your
Before Working Inside Your
cover.
cover.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.