Table of Contents
Advertisement
AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
Reboot the Modem Router from the Web Management
Interface
You or NETGEAR technical support can reboot the modem router from the web management
interface, either locally or remotely, for example, when the modem router seems to be
unstable or is not operating normally.
To reboot the modem router from the web management interface:
1.
Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2.
Type http://www.routerlogin.net.
A login screen displays.
3.
Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select ADVANCED > Administration > Diagnostics.
The Diagnostics screen displays.
6.
Click the Reboot button.
The modem router reboots.
Quick Tips for Troubleshooting
The following table includes tips for troubleshooting some common problems.
Table 4. Quick tips for troubleshooting
Problem
Your network is unresponsive
or does not function normally.
Possible Solution
Restart your network:
1.
Turn off and unplug the DSL, cable, or fiber modem.
2.
Turn off the modem router.
3.
Plug in the DSL, cable, or fiber modem and turn it on. Wait two minutes.
4.
Turn on the modem router and wait two minutes.
If network problems still occur, make sure that your ISP does not require you to
use the MAC address of the computer that was used to initially register the ISP
account. If your ISP does require that you do this, you must change the modem
router MAC address that the modem router uses. For more information, see
Manually Set Up the Internet Connection
Diagnostics and Troubleshooting
206
on page 45.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
