NETGEAR D6100 User Manual page 160

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
The following table describes the fields and columns of the Show Statistics pop-up
screen.
Field or Column
System Up Time
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval
ADSL Link
In addition to the xDSL firmware version, the screen displays the ADSL link information that is described in
this table.
Data Rate
Line Attenuation (LATN) The downstream and upstream LATN in dB. The LATN expresses the signal
Signal-to-Noise Ratio
Margin (SNRM)
Manage the Modem Router and Monitor the Traffic
Description
The time elapsed since the modem router was last restarted.
The statistics for the WAN (Internet over Ethernet) port, LAN (Ethernet) ports,
WLAN b/g/n, and WLAN a/n/ac ports. For each port, the screen displays the
information that is described in this table.
The link status of the port.
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of signal collisions that occurred on the port. A collision occurs when
the port attempts to send data at the same time as the device that is connected to
the port.
The number of bytes transmitted per second on the port.
The number of bytes received per second on the port.
The time elapsed since this port acquired the link.
The interval at which the statistics are updated in this screen.
The downstream and upstream data rates in Kbps.
quality.
The downstream and upstream SNRM in dB. The SNRM expresses the signal
quality in relation to interference.
160