Installation - Whirlpool Built-in Dishwasher Installation Instructions Manual

INSTALLATION
_CAUTION ]
%,o|.1
I_ CAUTION: DISCONNECT ELECTRICAL POWER BEFORE YOU START.
Start
,, Prepare the dishwasher cabinet opening.
Rough in the water line to the dishwasher cabinet
opening using one of the routing methods shown. A
5/8" to 1" diameter hole in the cabinet wall or floor is
sufficient. On models including a power cord, the cord
will extend 4 feet from the back of the dishwasher.
NOTE: A shut-off valve in an accessible location on
the water line is recommended. Flush the water line
prior to connecting to the dishwasher.
_* ' INCOM NG ",
"
WATEF_UNE t - I',
:: I o Through a separate hole located in the cabinet ,,vailor
:, , floor, route electrical line. See ElectricaI Requirements
,_j, ,8. .,.,_, - .. Section for details.
,I ]" _ INCOMING ELECTRIC \' _N
• i__ Prepare an opening in the cabinet opening for the
drain line.
m