Samsung AW069CB Owner's Instructions Manual page 31

Type
AW089CB/AW109CB/AW129CB/AW08ECB7/AW10ECB7/AW12ECB7
Installation(cont.)
11 Install the cabinet in the window.
11-1 Place the cabinet into the window with the top support channel
positioned just in front of the bottom sash.
ill
11-2 Pull the window down until it rests on the cabinet, just behind the top
support channel
11-3 Locate three screw holes along the cabinet bottom front edge.
Center the cabinet, side to side, in the window and mount it to the
window stool using three Type A screws.
For safety, always make sure the bottom channel rests securely on the inside
front edge of the window. If your window sill dimensions are such that this is
not possible, you may need to drill three additional holes equally spaced on
the bottom channel to properly secure the cabinet.
For some windows, it may be necessary to install 5cm(2") wide strips of
hard wood positioned along the width of the window to obtain the proper
alignment and pitch. The wooden strip must be screwed down securely
before resting the cabinet on top of it. Neglecting to ensure such security
may risk having the air conditioner fall out of the window and hurting
someone.
I i
12 Extend the window filler panels.
12-1 When the window is pulled down, the window should rest on the
cabinet just behind the window filler panel frames.
t2-2 Slide the filler panels outward until they touch the sides of the window.
Secure the panels by putting four Type A screws through the
mounting holes in the panels and driving them into the window stool
and sash.
t12
l TypeA Screws /
l TypeA Screws
13 Attach the security bracket with a Type A screw.
13
\
@