Changing A Light Bulb - Miele DA 5966 W Operating And Installation Instructions

Cleaning and care

Changing a light bulb

The halogen lights become very hot
when in use.
They can cause burns even after
being shut off for some time.
Allow them to cool down for a few
minutes before changing them.
 Disconnect the hood from the
electrical supply before replacing the
lights (see "IMPORTANT SAFETY
INSTRUCITONS").
22
 Remove the grease filter.
 Remove the charcoal filter if the hood
is being used in recirculation mode.
 Push the button above the lamp
down a little.
 Turn the halogen light counter-
clockwise and pull it out.
 Replace it with a new lamp of the
same type: GU/GZ 10, 120 V, 50W.
Screw the lamp into the socket and
push it upwards. Please the follow
manufacturer's instructions.
 Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.