Parts Identifi Cation - Kenmore Elite 153.331010 Use & Care Manual

PARTS IDENTIFICATION
ITEM #
A Baffl e, Flue
B Anode/MG/NIP/HT (w/ Hot water outlet nipple)
C T&P relief valve
D NIP/DIP/TBO/HT (w/ Cold water inlet nipple)
E Cover, Back-fl ue gas return
F Top insulation
G Flue gas return duct assembly
H Shroud, back-tank assembly
I Shroud, right side-tank assembly
J High Temperature Switch
K Drain/trap assembly-condensate
L Baffl e, Exhaust
M 12" Hose (braided)
N Drain valve
O Tank thermistor (probe)
P Front door lock (Hook cam)
Q Shroud, right side-tank assembly & door
R Display subassembly
S Heat engine assy
T Cover, front-fl ue gas return
U High-Limit Fuse
V Air inlet cover (Direct vent)
W Air inlet cover gasket (Direct vent)
X ECO Switch
Y Transformer
Z Control board assembly (w/ Base)
1 Power cord assembly
2 Flame sensor
3 Ignitor (spark generator)
4 Gas valve
5 Blower motor assembly
6 Circulation pump assembly
7 Water valve assembly
8 Front cover gasket
9 Water inlet fi tting
10 Inlet water fi lter
11 Return fi tting (fl ange)
12 Barbed fi tting
13 Heat exchanger
14 Service cap
15 Diptube J 3/4" (return)
DESCRIPTION
57