Siemens S6 GSM Service Manual page 19

6 TIME CHARGE
6.1 Last Call
Length and cost of last call
6.2 Total Calls
Lenght and cost of all calls
6.3 Auto Display
Automatic lenght and cost display
6.4 1 Minute Beep
1 minute indication during call
6.5 Charge Rate
Setting of charge rate
6.6 Charge Limit
Setting and activating of charge limit
If you have a phase 1 SIM-Card you will have to enter
the phonecode, with a phase 2 SIM-Card the PIN 2 is
needed.
7 LANGUAGE
7.1 Automatic
Language which preferred in the SIM-Card is used,
if the language is in the mobile software.
7.2 English
7.3 Deutsch
7.4 Francais
8 CAR USE
8.1 Auto Answer
If a call comes in it will be automatically answered
8.2 Auto Power Off
You can set the time of auto power off after ignition
has been switched of.
9 SET UP
9.1 DTMF Key Tone
DTMF for remote control of answering machines etc.
9.2 Key Sound
V1.3
Private Communication Systems
Clear (PHONECODE)
On / Off
On / Off
On / Off (PHONECODE / PIN 2)
On / Off
On / Off
Click / Tone / Silent
19
Mobile Phones
PN MP ST
D. Schnoor
10/97