Advertisement
Important
Safety
Instructions
iMPORTANT
iNSTRUCTiONS
FOR CLEANING
YOUR
RANGE
Before
manually
cleaning
any
part
of the
range,
be sure aii
controls
are turned
OFF
and
the range
is
COOL.
The range
may
be hot and
can
cause
burns.
* Clean the range regularly
to keep all parts free of
grease
that could catch fire. Pay particular
attention
to
the area around
each surface
burner.
Do not allow
grease to accumulate.
See the INSTALLATION
INSTRUCTIONS
packaged
with this
range for complete
installation and grounding
instructions.
* Kitchen
cleaners
and aerosols
m Always
follow
the
manufacturer's
recommended
directions for use. Be
aware that excess residue from cleaners
and aerosols
may ignite causing damage
and injury.
Power supply cord
with 3-prong
grounding
plug.
* Clean ventilating
hoods frequently
m Grease should not
be allowed
to accumulate
on the hood or filter.
Follow
the manufacturer's
instructions for cleaning
hoods.
Grounding
Instructions
Avoid fire hazard
or electrlcal
shock. DO
NOT use an adapter
plug, an extension
cord, or remove
grounding
prong from electrlcal
power cord. Failure
to
follow this warning
can cause serious injury, fire or death.
This appliance
is equipped
with a 3-prong
grounding
plug
for your protection
against
shock hazard
and should be
plugged
directly
into a properly
grounded
receptacle.
DO
NOT cut or remove the grounding
prong
from this plug.
For personal
safety,
the range
must be properly
grounded.
For maximum
safety,
the power cord must be plugged
into
an electrical
outlet that is correctly
polarized
and properly
grounded.
If a 2-prong
waft receptacle
is the only available
outlet, it is
the personal
responsibility
of the consumer
to have it
replaced
with a properly
grounded
3-prong
wail receptacle
installed by a qualified
electrician.
Conversion to L.P.Gas
Personal
inju_
or death from electrlcal
shock may occur if the range is not installed
by a
qualified
installer or electrician.
Any additions,
changes
or conversions
required
in order for this appliance
to satisfactorily
meet
the application
needs must be made by a qualified
technician.
This appliance allows for conversion to Liquefied Petroleum
(L.P.) Gas.
If L.P. conversion
is needed,
contact
your
local L.P. Gas
provider
for assistance.
The L.P. conversion
kit is provided
with this appliance
and is located
on the lower REAR (back
side) panel of the range. Before installing the kit be sure to
follow
the L.P. Installation
Instructions
carefully.
Advertisement
