Operation; Power On - AVT AVC 776 Manual

After keying in correct password, and confirm
by pressing "ENTER" button, Following screen
will be displayed. SEARCH ------- find recorded
list
TIMER
RECORD------- Record Mode Setup
CAMERA ------- Camera Channel Setup
SYSTEM ------- System Setup
EVENT -------- Event List
Press " ENTER " to confirm Full List, and the
screen
Press " " Up " or " Down " to choose wanted
recorded event (Only 8 recorded events will
be shown on a single page), and press
" Left " or " Right " to change the pages.
Press " ENTER" to Play selected recorded
video
M-HDD WARNING: Master HDD might be failed.
M-HDD LOSS: Master HDD does not exist. Now user can use the other HDD.
M-HDD ERROR: Master HDD might be error
S-HDD WARNING: Slave HDD might be failed
S-HDD LOSS: Slave HDD does not exist. Now user can use the other HDD.
S-HDD ERROR: Slave HDD might be error
HDD FULL: HDD is full
SYSTEM ERROR: System might be failed
----02 VLOSS: Channel: 2 Video loss
----03 ALARM: Channel: 3 External I/O Alarm have triggered
POWER RESTORE : Power restore

4. Operation

4.1

Power on

Before powering on the unit, make sure the HDD has been locked, and the POWER LED is
red color now. After pressing POWER button, POWER LED will turn to orange color, then all
other LED light will turn to RED color except the LED for HDD. OSD screen will display "HDD
Detecting", Power on running time will take approximately 15 to 20 seconds. If HDD is set as
Master, and screen will display " MASTER HDD CONNECTED". If HDD is set as Slave, and
screen will display "SLAVE HDD CONNECTED". In order to shorten the power on running
------- scheduling Record
will be as right displayed.
M–HDD WARNING 2002-JAN-01 03:00:00
M–HDD LOSS
M–HDD ERROR
S–HDD WARNING 2002-JAN-01 03:00:00
HDD FULL
SYSTEM ERROR 2002-JAN-01 03:00:00
----02 VLOSS
----03 ALARM
◄: PAGE UP ►: PAGE DOWN◄+►: CLEAR
31
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
► EVENT
2002-JAN-01 03:00:00
2002-JAN-01 03:00:00
2002-JAN-01 03:00:00
2002-JAN-01 03:00:00
2002-JAN-01 03:00:00