AVT AVC 776 Manual page 16

3.5.3.4 Press " MENU " to exit and confirm current operation.
3.5.3.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.4 MOTION AUDIBLE ALARM
To set the MOTION AUDIBLE ALARM. It will be trigged by motion detection occurrence
when the setting is ON.
3.5.5 ALARM DURATION Setup option:
This device allows user to set the ALARM DURATION. Reaction time was determined
by how long the alarm mode responded to a buzzer.
3.5.5.1 Press " Up " or " Down "
3.5.5.2 Press " ENTER " to confirm ALARM DURATION setup.
3.5.5.3 Press " Up " or " Down " to choose ALARM DURATION setup
10 SEC, 15 SEC, 20 SEC, 30 SEC, 1MIN, 2MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN,
30 MIN, ALWAYS.
3.5.5.4 Press " MENU " to exit and confirm current operation.
3.5.5.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.6 DWELL TIME setup
This device allows user to set the DWELL TIME. DWELL TIME is the lasting time that
each channel sequentially shown on monitor.
3.5.6.1 Press " Up " or " Down "
3.5.6.2 Press " ENTER " to confirm DWELL TIME setup.
3.5.6.3 Press " Up " or " Down " to choose DWELL TIME setup.
01~10 SEC.
3.5.6.4 Press " MENU " to exit and confirm current operation.
3.5.6.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.7 MESSAGE LATCH setup
This device allows user to decide the Ex External Alarm graph
showed on monitor or not.
3.5.7.1 Press " Up " or " Down "
3.5.7.2 Press " ENTER " button to confirm MESSAGE LATCH setup
3.6.7.3 Press " Up " or " Down " to choose the MESSAGE LATCH : ON/OFF
ON : Message latch ON
OFF : Message latch OFF
3.6.7.4 Press " MENU " to exit and confirm current operation.
3.6.7.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.8 TITLE DISPLAY setup
ALARM DURATION setup.
to choose
DWELL TIME setup.
to choose
MESSAGE LATCH setup
to choose
16
video loss graph