Specifications - AVT AVC 776 Manual

Full screen
4 channels
9 channels
1.2.6 Independent main and call monitor outputs allow simultaneous multi-camera or full
screen viewing.
1.2.7 Multi Screen Display Mode
Below display modes are selectable while surveillance & DMR play back:
Full Screen
1.2.8 Picture-In-Picture (PIP) is available in live and DMR playback modes, Zoom capability
up to 2 X 2 in live and DMR playback modes
1.2.9 16 channels are swappable and each channel has independent title generator (up to 6
characters).
1.2.10 Motion detection using 15x12 target (NTSC) 15x14 target (PAL) motion detection grids
for each video channel.
1.2.11 Video Quality Adjustable on Each Channel
1.2.12 Alarm Input Function & Output Function
1.2.13 16 channels alarm input, ALARM display and one alarm output.
Video loss detected on each channel can record 160 events.
1.2.14 Power-loss memory function: set up parameter will remain, in case of power failure.
1.2.15 Call Monitor: Switch Display
1.2.16 Support 1 Removable HDD, IDE Type (over 250GB)
1.2.17 Timer: Schedule recording
1.2.18 Display refresh rate up to 72 IPS (60 IPS for PAL)
1.2.19 Record refresh rate up to 25 IPS (18 IPS for PAL)
1.2.20 Quick Multiple Search by date/time, alarm, full list
1.2.21 Fast and slow playback in multiple speeds.
1.2.22 Security password protection
1.2.23 RS-232, RS-485 communication protocol

1.3 Specifications

Video format
Hard disk storage
Record mode
Camera Input Signal
Camera Loop Back
Main Monitor Output
Call Monitor Output
704(H) x 468(V) <NTSC> / 704(H) x 564(V) <PAL>
352(H) x 234(V) <NTSC> / 352(H) x 282(V) <PAL>
224(H) x 156(V) <NTSC> / 224(H) x 188(V) <PAL>
Quad 7 CH 9 CH
IDE type, UDMA 66, 1 removable HDDs supported over 250GB
Composite video signal 1 Vp-p 75Ω BNC, 9 channels
Composite video signal 1 Vp-p 75Ω BNC, 9 channels
10 CH 13 CH
NTSC/EIA or PAL/CCIR
Manual / Alarm / Timer / Motion
Composite video signal 1 Vp-p 75Ω BNC
Composite video signal 1 Vp-p 75Ω BNC
3
16 CH