Samsung SGH-D600 User Manual page 62

Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Leave a copy of messages on the server: leave
the copies of e-mails in the server after retrieving.
• Email account: set up your e-mail account(s) and
select the one to be used:
You cannot change e-mail account settings while
an e-mail is being sent or retrieved.
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
options are available for each account:
- In use: select this option to use the account and
to display the account in Email box.
- Account name: enter a name for the currently
selected account.
- User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
- Email address: enter your e-mail address.
- Reply address: enter your e-mil address to be
used when the recipient sends a reply.
- User ID: enter your e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- APOP login: connect to the server by using the
APOP login scheme when this option is selected.
- Secure connection: use a secure connections
for e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
59