Be sure to perform the following procedures before using the Organizer
for the first time:
1. Remove the insulation sheet.
Note:
When you remove the insulation sheet, write down the date on
the label on the back of the Organizer (refer to page 101).
2. Initialize the Organizer.
While holding [ml , press the RESET switch on the back. Release
the RESET switch and then release m] . The following display
will appear:
Note: Under certain conditions the message may appear as "DATA
ALL CLEAR OK (Y/N)?". Proceed to the next step in either case.
Press vi.
The Organizer is initialized and then the TEL1 directory is displayed.
Data has
been broken!
C l e a r a l l
CAPS
TEL
1
NAME ?
CAPS
4
,