Superio Configuration - Foxconn H55MX-S Series User Manual

► IDE Detect Time Out
This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.
OnBoard Configuration
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
OnBoard Audio Controller
OnBoard LAN Controller
OnBoard LAN Boot ROM
↑↓←→:Move Enter:Select
► OnBoard Audio Controller
This item is used to enable or disable the HD Audio controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

SuperIO Configuration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SuperIO Configuration
OnBoard Floppy Controller
Serial Port1 Address
Serial Port1 Mode
Serial Port2 Address
Serial Port2 Mode
↑↓←→:Move Enter:Select
OnBoard Configuration
[Enabled]
[Enabled]
[Disabled]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
SuperIO Configuration
[Enabled] [Enabled]
[3F8/IRQ4]
[Normal]
[2F8/IRQ3]
[Normal]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
34
Help Item
Options
Enabled
Disabled
F1:General Help
Help Item
Allows BIOS to Enable
or Disable Floppy
Controller.
F1:General Help