Advertisement
Quick Links
Advertisement
Related Manuals for Vectra Fitness VX-DC
Summary of Contents for Vectra Fitness VX-DC
- Page 1 ® FITNESS...
- Page 2 Vectra Fitness appreciate your selection of our product for your fitness program, and are struck by falling weights or invite your questions and comments. We're sure that you’ll be pleased with your new Vectra Fitness moving parts. The risk that you assume by using this type of equipment gym.
- Page 3 ® FITNESS PN 71570 Vectra Fitness, Inc. WWW.VECTRAFITNESS.COM Rev.- 11/2009...
- Page 4 ® FITNESS FOR CHIN SPREADER BAR INSTRUCTIONS VX-DC WITH STANDING ASSIST PN71940- MACHINE. NOT NEEDED FOR KNEELING ASSIST. USE THIS 3/8-16 X .75" LONG SCREW HERE ONLY, BOTH SIDES.
- Page 5 FIGURE 1 FIGURE 1...
- Page 6 GUIDE RODS INSIDE STANDING ASSIST LEVER LOCATIONS SHOWN BLUE "DIPS" LABEL THIS SIDE FLAT HEAD 3/8-16 X 1 SCREW (3) 3/4" LONG SCREW BOTH SIDES...
- Page 7 BUTTON HEAD BUTTON HEAD 3/8-16 X 3/4 SCREW 3/8-16 X 3/4 SCREW USE TWO WASHERS PER SIDE USE TWO WASHERS PER SIDE FOR STANDING ASSIST. FOR STANDING ASSIST. NO WASHERS NEEDED FOR NO WASHERS NEEDED FOR KNEELING ASSIST. KNEELING ASSIST. CHIN SPREADER BAR CHIN SPREADER BAR INSTALL THESE TWO SCREWS...
- Page 8 INSTRUCTIONS Follow the chart below to find the correct labels for the weight plates. STACK WEIGHT USE 310LB. INSTRUCTIONS TO LABEL WEIGHT STACK. VX-DC 11/09 ® FITNESS...
- Page 9 6C2, 6C3 VX-DC 11/09 ® FITNESS...
- Page 10 3/8-16 X 1.5 HEX SCREW 28010 WARNING LABEL 28020 MANUFACTURED BY VECTRA LABEL 71680-CLR VX-DC LEFT CHIN BAR ASSEMBLY (RIGHT IS PN71690-CLR) 71710 TUBE CLOSURE FOR 1" DIAMETER THICK WALL TUBE 71720 1" DIAMETER X 23" FOAM GRIP 71700 1.75" DIAMTER WITH HOLE TUBE END CAP...
- Page 11 VX-DC REAR FOOT ASSEMBLY 61960 OBROUND TUBE FLOOR FOOT 71380-CLR VX-DC REAR FOOT WELDMENT 71650-CLR VX-DC RIGHT STEP COLUMN ASSEMBLY (LEFT IS PN71640-CLR) 69530 VX-DC TOP STEP TREAD 69540 VX-DC MID STEP TREAD 71450-CLR VX-DC RIGHT STEP COLUMN WELDMENT (LEFT IS PN71440-CLR)
- Page 12 VX DC...