Consumer Defined Control Features - Kenmore 790. 4788 Use And Care Manual

Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius:
@
The BROIL _ Broil and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
Broil (Figure 1) and hold for 7 seconds; "---" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press :START;: t o accept the change or press sT_ to reject the
change.
for 7seconds
@
................. Q
or
Figure 1
Figure 2
Figure 3
12