Quick Reference; Attaching The Stand - Sharp AQUOS LC-70LE857U Operation Manual

QUICK REFERENCE
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the 1V on. This will prevent it from
being damaged.
CifJliiMI•
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
• LC-70LE857U/LC-60LE857U
1
Confirm that there are 9 screws (4 long screws,
4 middle screws and 1 short screw) supplied
with the stand unit.
2
At1ach the supporting post for the stand unit
onto the base as shown below.
• The supporting post attaches to the base at an
offcentered location on the base. Be sure to attach
the supporting post in the direction indicated
below and attach the stand to the lV with the
wider side of the base facing forward.
3
Insert the stand into the openings on the rear of
the lV.
• Make sure that the stand is firmly inserted into the lV.
Improper installation may result in tilting of the lV set.
4
®-6
5
CD
Insert the stand cover.
®
Insert the screw to secure the stand cover.
~
~~
:rscrew
• LC-70LE757U/LC-60LE757U/LC-70LE755U/
LC-60LE755U/LC-70C7500U/LC-60C7500U
1
Confirm that there are 12 screws (6 long screws,
4 middle screws and 2 short screws) supplied
with the stand unit.
2
G)
Set the post for the stand unit onto the
polystyrene foam.
®
At1ach the base to t he post.
®
Insert and tighten the 6 screws into the 6
holes on the bot1om of the base.
® •
• Hold the stand unit securely with one hand,
and then tighten the screws.
Long
screws
@ I
1tn......_J
3
Insert the stand into the openings on the rear of
the lV.
• Make sure that the stand is firmly inserted into the
lV. Improper installation may result in tilting of the
lVset.
4
Insert and tighten the 4 screws into the 4 holes
on the rear of the stand unit.
5
G)
Insert the stand cover.
®
Insert the 2 screw s to secure the stand cover.
1
~ ~
jShort screws
'
.