Hose Assembly - Pentair Pool Products GreatWhite User Manual

Hose Assembly

Assemble the hose
The unit includes twelve sections of hose, each 4 feet (4') in length (Figure 4). Do not cut the
hose lengths. You will need to connect these 4' sections of hose to create a combined hose length that is
at least 4' longer than the distance from your suction source (whether
skimmer or dedicated suction line) to the farthest point in the pool
(Figure 5). Connect the hoses by twisting and pushing the female ends
onto the male ends after wetting the ends in the pool (Figure 6). A
special "leader" hose section is designed to connect to the
cleaner's swivel assembly and therefore has a larger hose cuff
than the other hose lengths (Figures 7 and 8). Failure to use this
leader hose section to attach the hose to the cleaner's swivel assembly
will hinder your cleaner's performance. If additional hose is needed,
use only hoses from your Pentair Water Pool and Spa dealer (order replacement part No. 41200-0131).
Use of another manufacturer's hose will hinder cleaner coverage.
Female hose end
Figure 6
Connect to Swivel Assembly
Figure 7
Figure 5
Male hose end
Leader Hose
Hose
Twelve, 4' lengths
Figure 4
Leader Hose
Swivel
Assembly
Figure 8
Great White Installation and User's Guide
3