Preparation Of Your Pool; Cleaner Assembly - Pentair Pool Products GreatWhite User Manual

2

Preparation of your pool

Before you assemble and install your Great White automatic pool cleaner, you should make sure that your
pool is clean and free of algae. If necessary, make the following preparations before proceeding.
• Chemically balance the pool water
• Brush the pool and let the debris settle
• Hand vacuum the pool thoroughly
• Clean the filter and pump strainer basket (Figure 1)

Cleaner assembly

1. Check parts
Remove Great White and all of its parts from the box and check to make sure that all components were
included (Figure 2).
Cleaner
Swivel Assembly
Handle Adapter
Reducer Cone
Hose: Twelve 4' lengths
Vacuum Regulator
Regulator Cap
Vacuum Port Fitting
Flow Gauge
Attaching swivel assembly to cleaner head
2.
Installing the swivel assembly is a snap. Just insert it into the cleaner body and give it a quarter turn
(Figure 3). If you attach a unidapt handle to the swivel for manual vacuuming, be sure it is the special,
floating unidapt handle provided with the cleaner (Replacement Part No. GW9019). Use of a different
unidapt handle will hinder the cleaner's performance.
Great White Installation and User's Guide
Cleaner
Handle Adapter
Hose
Twelve
4' lengths
Swivel
Assembly
Figure 3
Skimmer
Basket
Figure 1
Swivel
Ass'y
Flow
Gauge
Vacuum
Vacuum
Port Fitting
Regulator
Figure 2
Pump
Strainer
Reducer
Cone
Regulator
Cap