Before Requesting Service - Panasonic NN-GD692S Operating Instructions Manual

Hide thumbs Also See for NN-GD692S:
Table of Contents

Advertisement

Before Requesting Service

ALL THESE THINGS ARE NORMAL:
The oven causes interference with my
TV.
Steam accumulates on the oven door
and warm air comes from the oven
vents.
I accidentally operate my microwave
oven without any food in it.
There are humming and clicking
noises from my oven when I cook by
Combination.
The oven has an odor and generates
smoke when using Combination and
Grill function.
PROBLEM
Oven will not turn on.
Oven will not start cooking.
"
" appears in the
display window.
The "
" appears in the Display
Window.
The oven stops cooking by
microwave and "H00", "H97" or
"H98" appears in the Display
Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
IP4230_39X90KT_Eng_25_120726.indd 21
IP4230_39X90KT_Eng_25_120726.indd 21
Some radio and TV interference might occur when you cook with the
microwave oven. This interference is similar to the interference caused by
small appliances such as mixers, vacuums, hair dryers, etc. It does not
indicate a problem with your oven.
During cooking, steam and warm air are given off from the food. Most of the
steam and warm air are removed from the oven by the air which circulates in
the oven cavity. However, some steam will condense on cooler surfaces such
as the oven door. This is normal.
Operating the oven empty for a short time will not damage the oven.
However, we do not recommend this to be done.
These noise occur as the oven automatically switches from microwave power
to Grill, to create the Combination setting. This is normal.
It is essential that your oven is wiped out regularly particularly after cooking
by Combination or Grill. Any fat and grease that builds up on the roof and
walls of the oven will begin to smoke if not cleaned.
POSSIBLE CAUSE
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or
blown.
There is a problem with the outlet.
The door is not closed completely.
Start Button was not pressed after
programming.
Another program has already
been entered into the oven.
The program has not been entered
correctly.
Stop/Reset Button has been pressed
accidentally.
The cavity is overheated.
The Child Safety Lock was activated by
pressing Start Button 3 times.
This display indicates a problem with the
microwave generation system.
- Eng-21 -
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Close the oven door securely.
Press Start Button.
Press Stop/Reset Button to cancel the
previous program and program again.
Program again according to the
Operating Instructions.
Program oven again.
Operate again after it cools
down.
Deactivate Lock by pressing Stop/
Reset Button 3 times.
Please contact the specified service
center.
2012-7-26 16:50:04
2012-7-26 16:50:04

Advertisement

Table of Contents
loading

Table of Contents