Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PowerBass Xtreme 2XL-60.3C
Summary of Contents for PowerBass Xtreme 2XL-60.3C
-
Page 1: Application Guide
2XL-60.3C 2XL 3-WAY COMPONENT SYSTEM Application Guide... - Page 3 170 dB. Please observe all local sound ordinances while listening to your PowerBass Xtreme system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the result...
-
Page 4: Additional Features
3-WAY COMPONENT SPEAKER FEATURES Stamped Woofer Basket (Stainless Steel Finish): These rigid baskets are designed to give the moving parts of the speaker the solid, corrosion free platform that they need to perform for even the most discriminating listener. 4-Layer Wool/Paper Composite Cone: The premium grade cones on the woofers are coated fibrous paper cone with woven wool fibers for addition strength and rigidity. -
Page 5: Crossover Network
SPECIFICATION FOR POWERBASS 2XL-60.3C SYSTEM (due to Constant Improvement, Specification and Parameter are subject to change without notice) 2XL-60.3C Woofer Size 6.5” Woofer Cone Material 4-layer Composite Cone Mid Range Size 2.75" Dome Material Silk Dome Tweeter Size 1.0" Dome Material... - Page 6 Installation of PowerBass Xtreme Speakers requires experience with a variety of mechanical and electri- cal procedures. This manual only provides general installation and operation instructions. If you have any reservations about your installation skills or lack of the proper tools, please contact your local PowerBass Xtreme dealer for assistance.
-
Page 7: Preparing For Installation
PREPARING FOR INSTALLATION NOTE: The tools listed below may be required for proper installation. An electric drill with drill bits Phillips-head and standard screwdrivers Wire strippers Crimping tool and needle-nose pliers Silicone sealant or closed cell weather-stripping Metal file Hole saw INSTALLATION PRECAUTIONS NOTE: Proceed only if you are a qualified installer otherwise;... - Page 8 MDF for additional support. The following are only general recommendations. If unsure about your level of installation skills, ask your authorized PowerBass Xtreme dealer for assistance. Component Woofer The proper installation procedure for mounting these high performance 6.5”...
- Page 9 SUGGESTED INSTALLATION OPTIONS...
-
Page 10: Installation Procedures
INSTALLATION PROCEDURES By mounting the tweeter separately from the woofer (or mid-range driver) the installer can choose the best location for sound quality and imaging. Optimum results are usually obtained by locating the tweeters and midrange speakers relatively close to each other, and by keeping the sound path lengths between the lis- tener and the left and right speakers as equal as possible. - Page 11 EXAMPLE OF MOUNTING If the tweeter has to be removed from the mounting cup, insert a small screwdriver in the back of the tweeter and carefully push the tweeter from the mounting cup.
- Page 12 CROSSOVER NETWORK INSTALLATION AND WIRING Your PowerBass Xtreme Component system contains two separate 3-way crossover networks. When choosing a location to mount the crossovers, keep in mind they contain electronic parts which can be damaged by moisture and dirt. Mount each crossover in a location that has easy access for wiring plus the adjustment of the Midrange and Tweeter levels (each can be adjusted by a slide switch located under the crossover cover).
- Page 13 The 3-way crossover network is constructed of the highest quality components selected and matched to tight tolerances that enable a linear frequency response and improved dispersion from each driver. There is a two-position level control for both the tweeter and midrange which allow high frequency adjustment tailored to your own personal taste.
- Page 14 CONVENTIONAL WIRING By selecting the OFF position on the switch labeled BI-AMP the crossover can be set up using a single amplifier input. While this set up does sacrifice some fidelity, it makes the best use of a single 2-channel amplifier.
- Page 15 BI-AMP WIRING By selecting the ON position on the switch labeled BI-AMP the crossover must be set up using two amplifier inputs. Wiring of the Bi-amp configuration is a bit trickier and careful attention must be paid to avoid dam- age to the entire system.
- Page 16 PowerBass and the CEA want you listening for a lifetime! This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions is strictly prohibited without the express consent of PowerBass USA, Inc.
- Page 17 Please call (909) 993-5399 for PowerBass Customer Service. You must obtain an RA# (Return Authorization Num- ber) to return any product to PowerBass. The RA number must be prominently marked on the outside of the shipping carton or the delivery will be refused. Please pack your return carefully; we are not responsible for items damaged in shipping.
- Page 18 PowerBass Xtreme (PBX) – A division of PowerBass USA, Inc. 13936 Mountain Avenue – Chino, CA 91710 Tel. (909) 993-5399 – Fax (909) 993-5393 www.powerbassusa.com...
Need help?
Do you have a question about the Xtreme 2XL-60.3C and is the answer not in the manual?
Questions and answers