Technics SL-P1300 Operating Instructions Manual page 17

Program play
button
1
Press the numeric button(s) to specify the
desired track.
The specified track is shown on the track display
2
Press the memory button.
Repeat steps 1 and 2 until the desired
programming (up to 20 tracks) is completed.
3
Press the play button.
Play begins from the first programmed track.
After the last programmed track has been played, the unit
switches to the stop mode.
t
-------
0
L---l
g
-! 0
---------------_-----------
I% 0
Specifi track3
S&y track 5
I Dl8"
q',frg*Qj
Specify track 1
W/hen the play button is pressed. play begins from track 3.
No@:
0" t " (error) is displayed momentarily if a track number not on
the disc is specified.
If more than 20 selections are entered "F " (full) is shown in the
display panel and no further selections can be programmed.
.Programming two tracks in a row:
For example, if tracks 3-5-5-l are programmed in that order,
press the memory button twice. after pressing
q
.
To clear a program entry
(When the unit is in the stop mode)
H Press the clear button.
Each time the clear button is pressed. the last track in the
programmed sequence is cancelled.
Note:
If the clear button is pressed during program play, all memory
contents are cleared and disc play continues from the current
point to the end of the disc (Memory clear function).